Question about the PYO Keeper

[Hannah]

Commission spots are currently closed! Please message me for details.
Please visit My Webpage to see my art and PYO's that I've done in the past!

[Hannah]

I recently got my first PYO Keeper – I’m very excited about it! I am wondering though, is the hole in his upraised paw supposed to go all the way through the statue? Mine does not, it’s got the beginnings of a hole on each side but it doesn’t go completely through. I had expected it to, but maybe I misunderstood the description ><

Commission spots are currently closed! Please message me for details.
Please visit My Webpage to see my art and PYO's that I've done in the past!

[Skeeterdeee]

I’m pretty sure it SHOULD go all the way through so he can hold something. Mine is holding a trick or treat bucket I only have one, so I’m not an expert, but mine DOES go all the way through.

[Kujacker]

It doesn’t? :scratch: Yes, it should have a hole through it.

[drag0nfeathers]

Yea, it does go all the way through. At least it’s supposed to. :scratch:

Got a busted Windstone?
drag0nfeathersdesign@gmail.com
*OPEN for repairs*

*SEEKING GRAILS*
Arc-en-ciel Emperor
Siphlophis Male Dragon
Calypso Hatching Empress
Ivory Moss Sitting Baby Kirin
Tattoo Mother Kirin
Emerald Tabby Male Griffin
Tie Dye + Orion Hatching Royalty
Indigo Rockfish + Flame Tabby Little Rock Dragons
Dragon Quail + Obsidian Frost Old Warriors
Betta Sun Dragon + Male Dragon
Dreamscape, Orion, Poison Dart, Fireberry, Spangler + Tigerberry Dragons

[machineguts]

Yes it’s supposed to go all the way through, that’s strange! :scratch:

[Grayfire_artz]

i’ve had one or two that have been that way…

[Hannah]

Gah! >< this makes the second problem in 2 days. I hate to bother Susie again, I doubt there's anything she can do about it.. but gosh darnit I really wanted to put something in there

Commission spots are currently closed! Please message me for details.
Please visit My Webpage to see my art and PYO's that I've done in the past!

[drag0nfeathers]

Hmm, do you have a drill or a dremel tool and a lot of patience?

Got a busted Windstone?
drag0nfeathersdesign@gmail.com
*OPEN for repairs*

*SEEKING GRAILS*
Arc-en-ciel Emperor
Siphlophis Male Dragon
Calypso Hatching Empress
Ivory Moss Sitting Baby Kirin
Tattoo Mother Kirin
Emerald Tabby Male Griffin
Tie Dye + Orion Hatching Royalty
Indigo Rockfish + Flame Tabby Little Rock Dragons
Dragon Quail + Obsidian Frost Old Warriors
Betta Sun Dragon + Male Dragon
Dreamscape, Orion, Poison Dart, Fireberry, Spangler + Tigerberry Dragons

[Hannah]

drag0nfeathers wrote:

Hmm, do you have a drill or a dremel tool and a lot of patience?

I dont have either

Commission spots are currently closed! Please message me for details.
Please visit My Webpage to see my art and PYO's that I've done in the past!

[etruscan]

Rather than trying to complete the hole, could you attach the trinket with a spring clip – something that has ends that fit into the existing holes?

[Hannah]

I could certainly try I suppose those are easy enough to find at craft stores?

Commission spots are currently closed! Please message me for details.
Please visit My Webpage to see my art and PYO's that I've done in the past!

[etruscan]

Yeral wrote:

I could certainly try I suppose those are easy enough to find at craft stores?

Now, that is a good question. Craft store? Hardware store? My ex-husband had a whole room full of stuff (plumbing, electrical, tools, nails, screws, washers, bolts, etc,, etc., etc.) so I got in the habit of just going downstairs and rummaging when I needed something. I’m not used to buying clips and fasteners.

[PurpleTurtle]

I have had a few Keepers like that as well. I used a dremel tool with a fine bit drill on it to complete the hole. It didn’t take much to get it through on my guys. Just use caution if you choose this method, of course .

[Author]

Posts