fbpx

Argh! Can someone give me some antiquing help??

Home Forums Windstone Editions Paint-Your-Own Windstone Argh! Can someone give me some antiquing help??

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #489660

    #538609

    I am using the deco antiquing stuff that you mix your acrylic paint with. I’m having a hard time getting the stuff to stick to my PYOs. When I go to wipe off, it ALL comes off. So I leave it on longer and again, either too much comes off or it’s splotchy. Any tips? TIA!

    #538610
    Arlla
    Participant

      I have a lot of trouble with that stuff myself…though it’s really the only thing that works for me on the kirin scales. I was having a HECK of a time on a kirin I’ve been working on the past two days, and tonight I found the answer – MOIST PAPER TOWELS. I wouldn’t have believed it myself, but unlike sponges, it actually leaves the antiquing where it’s supposed to be. I paint the stuff on, wipe a bit of the excess off (this you can do with a sponge) and let it dry for a little while. Then I come back with a damp paper towel and wipe away the rest – it works like a freakin’ charm. I’m stoked.

      "He that breaks a thing to find out what it is has left the path of wisdom."
      -J R R Tolkien

      #538611
      Lokie
      Participant

        You might want to PM Ski if she doesn’t pipe in. The antiquing on her Kirin’s scales is excellent and I’m curious to know her method.

        #538612
        Skigod377
        Participant

          I bought a sponge-type thing at the crafts store. Its on a wooden stick and has a grey sponge thingy at the end. I have been trying to look it up, but I cant find it. 😕 I used 3 different antique gels on yours, Lokie. If you want it darker, lay it on thick and leave it on longer. I really coat it on, then just wipe off what I dont want. I am actually gonna try the wet paper towel method. I think that may be less streaky. The Ki rins scales streak really easily.

          #538613
          Lokie
          Participant

            skigod377 wrote:

            I bought a sponge-type thing at the crafts store. Its on a wooden stick and has a grey sponge thingy at the end. I have been trying to look it up, but I cant find it. 😕 I used 3 different antique gels on yours, Lokie. If you want it darker, lay it on thick and leave it on longer. I really coat it on, then just wipe off what I dont want. I am actually gonna try the wet paper towel method. I think that may be less streaky. The Ki rins scales streak really easily.

            Hmm, I’m just have a really hard time getting the antique on the round scales, near the Kirin’s inner thigh to actually stay put. I was extremely impressed with that area on yours because it looks close to perfect. I do tend to try to remove all streaks so maybe in the future I should just not try to wipe as much off, and then just touch up the circle scales.

            For the larger Kirin scales, I don’t have much of a problem because I actually paint in the antiquing to avoid streaks or wiping to much off.

            #538614

            I use a moist paper towl 100% of the time, and regular water. Depending on the consistancy of the paint, and how dark you want it to be, the less water you use. If you want a darker outline, go for broke and don’t add water to your brush to apply it. On my amathyst KiRin I had painted the scales in white, and once dry, I painted the pink hue directly over it very quickly, like I was applying a base color. Then, again quickly, I used the mist towel and wiped downward across the scales…down because you want the paint to stay in the crevice. It’s not 100% perfect on the first go, so do it again, and touch-up any areas where paint is where you don’t want it. For the inner thigh area, I add a touch of water to my brush and add the color I want to antique, and cover the scales. Some will drip down the inner leg of the Ki-Rin so try to watch that…you will probably need to touch it up later. Sometimes the water pooled the color perfectly in it’s own antique, other times you’ll need the paper towel again lightly. This is also true for dragon wings. I never use a paper towel on those, just some slightly wet paint and paint it around the wing until it pooled in the crevices.

            #538615
            Jennifer
            Keymaster

              To add on to what everyone said (moist paper towels do work well! You just have to be careful that you don’t start getting little tiny bits of paper towel ‘sloughing’ off onto your PYO), I never get good results with just one layer of antique. I usually do 3 or more in progressively darker shades, or it looks splotchy and weird. 🙂

              Volunteer mod- I'm here to help! Email me for the best response: nambroth at gmail.com
              My art: featherdust.com

              #538616
              drag0nfeathers
              Participant

                Honestly, I have the best results just wetting my finger and wiping lightly against the grain of the area thet is being antiqued. Just small areas at a time. Then use a large/ medium soft brush (long bristles work best) and dampen it (just a little) and bush against the grain of thw whole area to even out any splotches wiping excess paint off on a paper towl and re wetting the brush as you go along. I get really flawless results like that, but it’s quite tedious.

                Got a busted Windstone?
                drag0nfeathersdesign@gmail.com
                *OPEN for repairs*

                *SEEKING GRAILS*
                Arc-en-ciel Emperor
                Siphlophis Male Dragon
                Calypso Hatching Empress
                Ivory Moss Sitting Baby Kirin
                Tattoo Mother Kirin
                Emerald Tabby Male Griffin
                Tie Dye + Orion Hatching Royalty
                Indigo Rockfish + Flame Tabby Little Rock Dragons
                Dragon Quail + Obsidian Frost Old Warriors
                Betta Sun Dragon + Male Dragon
                Dreamscape, Orion, Poison Dart, Fireberry, Spangler + Tigerberry Dragons

                #538617

                drag0nfeathers wrote:

                Honestly, I have the best results just wetting my finger and wiping lightly against the grain of the area thet is being antiqued. Just small areas at a time. Then use a large/ medium soft brush (long bristles work best) and dampen it (just a little) and bush against the grain of thw whole area to even out any splotches wiping excess paint off on a paper towl and re wetting the brush as you go along. I get really flawless results like that, but it’s quite tedious.

                Ha! I was about to post the same thing. I use my fingers! I just coat the whole thing in a well thinned colored and then rub my thumb or finger over the spot to expose the details.

                #538618
                drag0nfeathers
                Participant

                  Aaaaaah yea, I just used the thumb wiping technique on a certain someones PYO for the swap! BAW HHAHAHAHAHHA! *I’m so evil*

                  Got a busted Windstone?
                  drag0nfeathersdesign@gmail.com
                  *OPEN for repairs*

                  *SEEKING GRAILS*
                  Arc-en-ciel Emperor
                  Siphlophis Male Dragon
                  Calypso Hatching Empress
                  Ivory Moss Sitting Baby Kirin
                  Tattoo Mother Kirin
                  Emerald Tabby Male Griffin
                  Tie Dye + Orion Hatching Royalty
                  Indigo Rockfish + Flame Tabby Little Rock Dragons
                  Dragon Quail + Obsidian Frost Old Warriors
                  Betta Sun Dragon + Male Dragon
                  Dreamscape, Orion, Poison Dart, Fireberry, Spangler + Tigerberry Dragons

                Viewing 11 posts - 1 through 11 (of 11 total)
                • You must be logged in to reply to this topic.